Pigment Red 245 (C.I. 12317) — Naphthol AS Pink Red for Pigment Printing Pastes, Inks and Coatings

Pigment Red

Pigment Red 245 (C.I. 12317) — Naphthol AS Pink Red for Pigment Printing Pastes, Inks and Coatings

Starwin Pigment Red 245 (Naphthol AS, CAS 68016-05-7) for pigment printing pastes, NC/PA packaging inks and industrial coatings. Blue-shade pink red, bleeding resistance 5, lightfastness 5–7.

Key Information

CAS Number68016-05-7
Molecular FormulaC₂₅H₂₀N₄O₄
Molecular Weight440.45 g/mol
AppearanceRed powder

Technical Specifications

Product Overview

Pigment Red 245 (C.I. 12317) is a Naphthol AS(monoazo) organic pigment delivering a blue-shade pink red(蓝光洋红) tone with high colour strength, good bleeding resistance and good performance in aqueous systems. Its primary application is textile pigment printing pastes(涂料印花色浆), with important use in NC and PA packaging inks and industrial coatings. Plastic use is limited and is not the recommended direction for this pigment.

The defining characteristics of PR245 are its combination of blue-shade pink-red hue, good bleeding resistance(rated 5)and broad compatibility with aqueous textile printing systems: acid and alkali resistance typically 4–5 to 5, water resistance 5, and lightfastness of 5–7 depending on grade and medium. Heat resistance is reported in the 160–200°C range depending on grade and system, with selected high-heat data reaching 250°C. Its blue-shade pink red makes it particularly suitable for textile pigment printing, packaging inks and coating systems where a magenta-leaning red is required.

Starwin Red 245 is supplied by Hangzhou Starwin Tech Co., Ltd., with more than 20 years of experience in organic pigment production and export. Batch testing covers shade, tinting strength, oil absorption, moisture, pH and sieve residue. Application-specific grades are available for textile printing, inks and coatings, each validated against the respective performance requirements.

Identification

PropertyValue
C.I. NamePigment Red 245
C.I. Number12317
CAS No.68016-05-7
EC No.268-171-6
Chemical ClassNaphthol AS / Monoazo
Molecular FormulaC₂₅H₂₀N₄O₄
Molecular Weight440.45 g/mol
AppearanceRed powder
Color ShadeBlue-shade pink red(蓝光洋红)
SynonymsNaphthol Red 245, Fast Pink B, Permanent Pink, Fast Carmine RBS, 6368 Permanent Pink, Suimei Fast Pink B

Typical Specifications

ParameterTypical Value
Density / Specific Gravity1.4–1.5 g/cm³
pH(aqueous extract)6.5–7.5
Oil Absorption40–50 g/100g
Moisture / Volatile at 105°C≤ 1.5–2.5%
Water-Soluble Matter≤ 1.5%
Sieve Residue(80–100 mesh)≤ 5.0%
Electrical Conductivity≤ 500 μS/cm
Heat Resistance160–200°C(standard grade data);up to 250°C in selected high-heat data
Light Fastness(Blue Wool, 8-grade)5–7(grade dependent);representative data 7
Acid Resistance4–5 to 5
Alkali Resistance5
Water Resistance5
Linseed Oil Resistance4
Alcohol Resistance4
Xylene Resistance5
Ethyl Acetate Resistance4
Bleeding Resistance5
Primary ApplicationTextile pigment printing pastes(涂料印花色浆)
Important ApplicationsNC/PA packaging inks;industrial coatings
Limited ApplicationPlastics(not the recommended direction)

Typical values. Refer to the COA for each shipment. Heat stability and fastness vary by grade, system and depth of shade.

Parameter interpretation:

Bleeding resistance — a defining advantage in pigment printing. Bleeding resistance is rated 5, with alkali and water resistance at 5 and acid resistance at 4–5 to 5. This profile is particularly relevant in textile pigment printing pastes, where binder compatibility, electrolyte stability and washing fastness are critical.

Heat resistance — grade- and system-dependent. Published values range from 160°C and 180°C in standard grades to 200°C in other commercial data, with selected high-heat data citing up to 250°C. The appropriate figure depends on whether the application is textile printing cure, ink processing or coating bake, and on dwell time and binder system.

Lightfastness — moderate to good, grade-dependent. Representative data shows lightfastness 7(Blue Wool scale) in some grades, while other commercial data indicates 5. The pigment is best positioned for full to medium shades in interior and moderate-exposure applications; ultra-pale exterior tints should be validated against the specific exposure conditions.

Colour shade — blue-shade pink red. PR245 is described as a blue-shade pink red / magenta-leaning red, distinguishing it from yellower naphthol reds. This hue is particularly suited to textile printing, packaging inks and coating systems where a bluer red is required.

Applications

Textile Pigment Printing Pastes — primary recommended use. PR245 is designed for pigment printing pastes(涂料印花色浆), where it provides a blue-shade pink red with high colour strength, good bleeding resistance and aqueous-system compatibility. Its alkali and water resistance support paste stability and washing fastness, and its hue is suitable for cotton, polyester and blended fabric printing in both flat-screen and rotary-screen printing systems. Binder and thickener compatibility should be validated for the specific paste formulation.

Printing Inks — important application. PR245 is recommended for NC(nitrocellulose)and PA(polyamide)packaging inks, where its blue-shade pink red, high colour strength and bleeding resistance are advantageous. It is also suitable for water-based inks, with good performance in water-base noted in commercial data. Solvent-based and UV inks are additional application areas in representative grade data.

Industrial Coatings — important application. PR245 is used in industrial paints, decorative coatings, coil coatings, general industrial finishes and powder coatings, where its lightfastness, chemical resistance and hue support durable coating systems. Automotive-adjacent and general industrial applications are cited in commercial grade descriptions.

Plastics — limited, not the recommended direction. PR245 is not positioned as a primary plastic colorant. While some commercial grade data references plastic applications, plastic use is limited compared with textile printing, inks and coatings. Heat resistance and migration behaviour should be validated grade-specifically if a plastic application is under consideration.

Technical Parameter Reference

The table below compares published parameter ranges for representative PR245 grades for formulation context only. It does not identify a specific commercial "equivalent" product. Starwin is not affiliated with, sponsored by, or endorsed by any referenced supplier.

Parameter (indicative)PR245 (typical range)Notes
Chemical classNaphthol AS / MonoazoDistinct from benzimidazolone, anthraquinone and perylene reds
Colour shadeBlue-shade pink redMagenta-leaning red
Heat resistance160–200°C (standard); up to 250°C (selected data)Grade and system dependent
Lightfastness (full)5–7 (representative data 7)Blue Wool scale
Bleeding resistance5A relative strength, especially relevant to pigment printing
Acid / alkali / water4–5 to 5 / 5 / 5Good chemical resistance
Primary applicationTextile pigment printing pastesInks and coatings secondary
Plastic suitabilityLimitedNot the recommended direction

Reference commercial product names for parameter comparison only: ZEYA Corimax Red 245 (bluish monoazo red; coatings and ink applications cited in commercial data), Clariant Hostatint Red A-D3GD 130 (solvent-containing pigment preparation based on aldehyde resin carrier, for industrial paint applications), Suimei Fast Pink B (powder grade for inks), Seikfast Rubine RK-1 (powder grade for inks and dyeing), Fast Pink B / Permanent Pink / Fast Carmine RBS / 6368 Permanent Pink. These names identify the product type solely; no equivalence or endorsement is claimed.

No claim is made that any Starwin grade is identical to, a direct replacement for, or endorsed by any referenced product or supplier. Samples should be tested in the customer's specific formulation, paste system and processing conditions.

Regulatory Status

PR245 is an industrial colorant with a generally favourable industrial-use profile. Grade-specific purity and migration data should be requested for textile articles with skin contact, food-contact, toy, cosmetic or other sensitive applications. Customers must verify the exact grade and end-use against the target market's regulation before commercial use. Starwin can provide regulatory documentation support on request; end-use compliance remains the customer's responsibility.

Packaging & Storage

Packaging: 25 kg/bag with inner PE liner; fibre drum available. Custom packaging available upon request.

Storage: Cool, dry, ventilated area, away from direct sunlight and moisture. Keep container tightly closed when not in use.

FAQ

What is Pigment Red 245 mainly used for?Textile pigment printing pastes(涂料印花色浆) are the primary application. NC/PA packaging inks and industrial coatings are also important uses. Plastic use is limited and is not the recommended direction for this pigment.

What are the main performance advantages of Pigment Red 245?Bleeding resistance 5, good acid/alkali/water resistance(4–5 to 5), lightfastness 5–7 depending on grade, and a blue-shade pink-red hue suited to textile pigment printing, packaging inks and coating systems.

Is Pigment Red 245 suitable for plastics?Only to a limited extent. Plastic use is not the recommended direction for PR245. If a plastic application is under consideration, heat resistance and migration behaviour should be validated grade-specifically.

What is the heat resistance of Pigment Red 245?Standard grade data ranges from 160°C to 200°C, with selected high-heat data reaching up to 250°C. The appropriate figure depends on the system, dwell time and whether the application is textile printing cure, ink processing or coating bake.

Is Pigment Red 245 lightfast?Lightfastness is 5–7 on the Blue Wool scale depending on grade and medium, with representative data citing 7. It is best positioned for full to medium shades in interior and moderate-exposure applications.

Does Starwin provide samples?Yes. Samples, COA and SDS are available for evaluation. Application-specific grades can be recommended based on the target system and processing conditions.

Why Starwin

More than 20 years of experience in organic pigment production and export.

Application-specific grades for textile printing, inks and coatings, each validated against the respective performance requirements.

Batch testing on shade, strength, oil absorption, moisture, pH and residue.

Export experience across Asia, Europe and the Americas.

Flexible MOQ for trial orders.

Contact

Hangzhou Starwin Tech Co., Ltd.

Email: sales@starwinchem.comWhatsApp: +13588134912

TDS, SDS, samples, pricing: Pigment Red 245 (CAS 68016-05-7)

Trademark Disclaimer: All brand names and trademarks mentioned are the property of their respective owners and are used for identification and technical reference only. Hangzhou Starwin Tech Co., Ltd. is not affiliated with, sponsored by, or endorsed by any referenced company. Nothing on this page constitutes a claim of equivalence, substitution, or endorsement.

Product Documentation

Download technical documents for this product

SDS

Coming Soon

TDS

Coming Soon

COA

Coming Soon

Interested in This Product?

Contact us for pricing, samples, or technical support