Pigment Red 81 (C.I. 45160:1) — Rhodamine Lake Pink for Inks, Coatings and Stationery

Pigment Red

Pigment Red 81 (C.I. 45160:1) — Rhodamine Lake Pink for Inks, Coatings and Stationery

Starwin Pigment Red 81 (Rhodamine B Lake) delivers exceptionally bright bluish-red/pink shades with fluorescent character for offset, water-based and solvent inks, indoor coatings and stationery.

Key Information

CAS Number12224-98-5
AppearanceBright pink to bluish-red powder

Technical Specifications

Product Overview

Pigment Red 81 (C.I. 45160:1) , also known as Rhodamine B Lake, Fast Pink Toner or Fanal Pink, is a basic dye lake / xanthene lake organic pigment derived from the Rhodamine dye cation. It delivers a very clean, intense bluish-red to pink shade with fluorescent character—a brightness and purity of shade that is difficult to match with ordinary azo pigments. In the USA, this type is historically referred to as "Process Red" because its clean bluish-red matches the magenta position in three- and four-color printing.

The defining strength of PR81 is shade brilliance, not durability. It offers high tinting strength and exceptional visual impact, but lightfastness is poor to moderate(typically 2–4, and worse in tints) , heat resistance is limited(~120–170°C) , resistance to polar solvents(alcohols, ketones, esters)is poor , and acid/alkali resistance is low. It is therefore positioned for offset, water-based and solvent-based inks, interior decorative coatings and stationery—not for outdoor exposure, high-temperature engineering plastics, or systems requiring strong chemical resistance.

Starwin Red 81 is supplied by Hangzhou Starwin Tech Co., Ltd. Batch testing covers shade, tinting strength, oil absorption, moisture, pH and sieve residue.

Identification

PropertyValue
C.I. NamePigment Red 81
C.I. Number45160:1
CAS No.12224-98-5
EC No.235-424-7
Chemical ClassBasic dye lake / Xanthene lake(Rhodamine B / Rhodamine 6G phosphotungstomolybdate)
AppearanceBright pink to bluish-red powder
Color ShadeBluish red / pink(fluorescent character)
SynonymsRhodamine B Lake, Fast Pink Toner, Fanal Pink, Toner Pink G, Process Red(USA)

Typical Specifications

ParameterTypical Value
Density1.5–1.8 g/cm³(substrate dependent)
pH(10% slurry)5.0–8.0
Oil Absorption40–60 g/100g
Moisture Content≤ 2.5%
Water-Soluble Matter≤ 2.0%
Sieve Residue(80 mesh)≤ 5.0%
Heat Resistance~120–170°C(grade dependent; standard grades ~120°C)
Light Fastness(Full Shade)2–4(8级制; poor to moderate)
Light Fastness(Reduced Tint)1–3(drops sharply in tints)
Acid Resistance2(poor)
Alkali Resistance2(poor)
Water Resistance3–4
Oil Resistance3–5(grade dependent)
Polar Solvent Resistance(alcohol, ketone, ester)Poor — a defining limitation
Aliphatic/Aromatic Hydrocarbon ResistanceGood(paraffin, butter, fats)
Primary ApplicationPrinting inks
Important ApplicationsInterior decorative coatings; stationery and art materials; low-temperature plastics(PVC, LDPE)
Key LimitationPoor lightfastness(especially in tints); poor polar-solvent resistance; poor acid/alkali resistance; heat ceiling ~120–170°C

Typical values. Refer to the COA for each shipment. Fastness and heat stability vary significantly with grade, laking agent and substrate.

Parameter interpretation:

Shade brilliance and fluorescence — the core reason to specify PR81. The pigment provides a clean, intense bluish-red/pink with a fluorescent visual effect that standard azo reds cannot replicate. This makes it valuable in magenta process inks, poster inks and bright decorative systems where maximum chroma is the priority.

Lightfastness — poor to moderate, and worse in tints. Full-shade lightfastness is typically 2–4, and reduced-tint lightfastness falls to 1–3. PR81 is not suitable for outdoor or long-term UV-exposed applications, and should not be expected to hold shade in pale tints.

Polar solvent resistance — the key ink constraint. PR81 lacks fastness to alcohols, ketones and esters, but performs well against aliphatic and aromatic hydrocarbons, paraffin and fats. This means it is better suited to hydrocarbon-based and selected water-based systems than to aggressive polar-solvent inks.

Heat resistance — limited. Standard grades are rated around 120°C, with some grades reaching 140–170°C depending on the laking system. PR81 is limited to low-temperature plastics(PVC, LDPE) and is not suitable for engineering plastics.

Acid/alkali resistance — poor. Both are typically rated 2, so alkaline or acidic formulations require validation.

Applications

Printing Inks — primary recommended use. PR81 is used in:

Offset inks(including process-color magenta positions)

Water-based flexographic and gravure inks

Solvent-based packaging inks where polar solvent levels are controlled

Poster and magazine inks requiring high brightness

Its clean bluish-red tone and fluorescent character support vivid, high-impact print results. Polar-solvent-heavy systems should be validated against the known limitation.

Coatings — interior decorative and industrial finishes. Used in indoor decorative paints and industrial finishes where maximum brightness is the priority and lightfastness is not critical. Not recommended for exterior or high-durability coatings without validation.

Stationery and Art Materials — important application. Colored pencils, crayons, stamp-pad inks, oil paints and educational materials benefit from PR81's brilliant pink shade and high tinting strength.

Plastics — limited to low-temperature polymers. Used in PVC and LDPE where processing temperatures remain within the pigment's stability window. Not positioned for high-temperature engineering plastics such as PA, PBT or PC.

Technical Parameter Reference

The table below lists published parameter ranges for selected commercial PR81-type products for formulation reference only. Brand names identify the referenced product solely; Starwin is not affiliated with, sponsored by, or endorsed by any listed company.

Reference Product(parameter comparison only)Lightfastness(Full Shade)Heat ResistanceKey Application DirectionSuggested Starwin Grade for Evaluation
BASF Fanal Pink D 4830 / Fanal Rose Toner(PR81 type)2–4~120–150°CInks, stationery, interior coatingsSW-R81-01 / SW-R81-02
Clariant / Sun Chemical Fast Rose 40 / Fast Rose 44(PR81 type)2–4~120–150°COffset, water-based and solvent inksSW-R81-01 / SW-R81-03
Suncolor Red 5381 / 5381A(PR81 type)3–4~120°CWater-based and solvent-based inksSW-R81-02 / SW-R81-03
Commercial 3262 Fast Pink Toner / 桃红色原 grades4120°CSolvent inks, offset inks, water-based inks, stationerySW-R81-01 / SW-R81-02

No claim is made that any Starwin grade is identical to, a direct replacement for, or endorsed by a referenced product. Samples should be tested in the customer's specific formulation, solvent system and processing conditions.

Regulatory Status

PR81 is an industrial colorant and is not automatically approved for food-contact or cosmetic applications. The parent Rhodamine dye chemistry is subject to regulatory scrutiny in sensitive end-uses, and some rhodamine-related substances carry hazard classifications for oral toxicity and skin/eye effects. Customers must verify the exact grade and end-use against the target market's regulation before commercial use. Starwin can provide regulatory documentation support on request; end-use compliance remains the customer's responsibility.

Packaging & Storage

Packaging: 25 kg/bag with inner PE liner; fiber drum available.

Storage: Cool, dry, ventilated area, away from direct sunlight, moisture and polar solvents. Keep container tightly closed when not in use.

FAQ

What is Pigment Red 81 mainly used for?Printing inks(offset, water-based, solvent-based, poster/magazine)are the primary application. Interior decorative coatings, stationery/art materials and low-temperature plastics(PVC, LDPE)are also important uses.

What is the main advantage of Pigment Red 81?Exceptional shade brilliance and fluorescent character in the bluish-red/pink region, with high tinting strength. It provides a visual impact that ordinary azo pigments cannot match, making it valuable for process magenta and high-brightness decorative applications.

What is the main limitation of Pigment Red 81?Poor lightfastness(especially in tints) , poor resistance to polar solvents(alcohols, ketones, esters), poor acid/alkali resistance, and a heat ceiling around 120–170°C. It is not suitable for outdoor, high-temperature or chemically aggressive systems.

Is Pigment Red 81 the same as "Process Red"?In the USA, this pigment type is historically referred to as "Process Red" because its clean bluish-red matches the magenta position in three- and four-color printing.

Can Pigment Red 81 be used in plastics?Only in low-temperature plastics such as PVC and LDPE. Its heat resistance is too low for engineering plastics.

Does Starwin provide samples?Yes. Samples, COA and SDS are available for evaluation.

Why Starwin

Grades positioned across offset inks, water-based/solvent inks, interior coatings and stationery.

Batch testing on shade, strength, oil absorption, moisture, pH and sieve residue.

Export experience across Asia, Europe and the Americas.

Flexible MOQ for trial orders.

Contact

Hangzhou Starwin Tech Co., Ltd.

Email: sales@starwinchem.comWhatsApp: +13588134912

TDS, SDS, samples, pricing: Pigment Red 81 (CAS 12224-98-5)

Trademark Disclaimer: All brand names and trademarks mentioned are the property of their respective owners and are used for identification and technical reference only. Hangzhou Starwin Tech Co., Ltd. is not affiliated with, sponsored by, or endorsed by any referenced company. Nothing on this page constitutes a claim of equivalence, substitution, or endorsement.

Product Documentation

Download technical documents for this product

SDS

Coming Soon

TDS

Coming Soon

COA

Coming Soon

Interested in This Product?

Contact us for pricing, samples, or technical support